• Follow us

Steel Sleeve For Aluminum Strips Rolling Mill Winder

1. Scope of Usage and Classification 1-1.Scope of Usage They will be used for the left & right winder of aluminum strip rolling mill 1-2. Size :as drawing 1-3 .Usage Conditions As the customer requirement 2. Benchmark Related to Pilot Project 2-1. Hardness Inspection Three point inspection :...

Description


1. Scope of Usage and Classification

1-1.Scope of Usage 

The steel sleeve will be used for the left & right winder of aluminum strip rolling mill

1-2. Size :as drawing

1-3 .Usage Conditions

As the customer requirement

2. Benchmark Related to Pilot Project

2-1. Hardness Inspection

Three point inspection: By using "Hardness Meter" device conduct inspection on either and middle of the sleeve, and collect data for three times from each test point and compare them with the theoretical value, then determine if it is qualified or not.

2-2. Size Inspection

By using steel tape measure, check the Out Diameter and Length, collect data and take the average to compare with the therotical value.                  

Inner Diameter will be checked by using inside micrometer, and data will be collected for three times from each test point and compare them with the therotical value, the reading accuracy will be one tenth.

3. Necessary Conditions And Quality Assurance

MaterialAlloy forged steel

   Roughness:as requirement

   Mechanical properties :as requirement

When the Left / Right Winder create tension, the steel sleeve must be no deformation, rupture, or less inner / outer strength and abrasion that lead to slippage.

we will submit the Manufacturing Drawings before starting the manufacturing process, after the client verify it, manufacturing process can have a start. ( 3 Copies: 1 copy for returning, two copies for keeping)

4. Packaging and Transportation

4-1. PackagingEach steel sleeve shall be packed in a wooden box, surface will be coated with grease oil, and covered with plastic materials fully in order to protect from rusting and surface corrosion.

4-2. Transportation protected from any damages and deformations.

5. Quality Ensurance

   we guarantee that performance of the steel sleeve meets the requirements and the related standards, and should satisfy the buyer with the usage for 12 months from date of acceptance.

 6.Delivery time 

as the quantity 

7.payment 

as agreement 


if you need forged steel sleeve ,welcome to contact with us through email tedmachine@live.com

Ted Machine, with over 10 years experience, is one of leading steel sleeve for aluminum strips rolling mill winder manufacturers and suppliers in China. We have introduced advanced equipment and technology in our plant. Welcome to buy the customized and quality equipment from our factory.
Related Products

Feedback