• Follow us
Home > News > Content
Drawing Machine Noise Prevention And Energy Saving Small Common Sense
Aug 09, 2017

Drawing Machine noise prevention and energy saving small common sense
   When the object has a vibration when there will be a sound, if the sound affects our rest and work it is called noise. In fact, when the industrial production or transportation, there will be noise, which is actually a kind of pollution. When we operate the wire Drawing Machine in the drawing shop, the noise he produces is very large, so that the health of the operator is also a great impact. When the gear is in motion, the tooth noise will appear, he is the largest noise source of the wire Drawing Machine, the meshing surface or the gears when they are in the assembly if there is a very wide gap then it is possible to let them in the transmission Time there is a lot of noise. We have to adjust his gear to the gap, so as to ensure that his gear lubrication.
Drawing Machine barrel in the need for heating, is the use of heating ring for heating, this way quite power, the heating process is this: first heating ring need their first fever, then the heat transfer to the Drawing Machine Barrel, then in the process of heat transfer will inevitably lose part of the heat, the waste of heat is actually a waste of energy.
In addition, because the outer surface of the heating ring is sure to come into contact with the air, then that is part of the heat will be wasted in the air, which is equal to the waste of electricity, wire Drawing Machine only heat in this part of the heating ring The loss of nearly 40 percent of electricity, in order to avoid this situation, we can use a product called electromagnetic heaters, as long as the surface of the Drawing Machine wrapped in a layer of insulation cotton, plus A layer of electromagnetic heating coil, power, the electromagnetic coil will appear electromagnetic induction, the barrel will automatically heat, due to the presence of insulation cotton temperature will not reach the air, the power is so saved, compared to Heating ring, electromagnetic heaters can save at least 30 percent more electricity, very save and cost-effective, heating speed and very ideal, is currently the best Drawing Machine partner.
Drawing Machine is a commonly used processing equipment, which is a combination of many precision components, with the technical progress and functional improvement, Drawing Machine for the field is also constantly expanding. In order to obtain a good drawing effect, the production process must control its relationship with the empty variable, which contains the specific content?
If the relationship between the drawing process and the controlled variable as a basis, then the Drawing Machine can be divided into two types of control type, one is the direct indicator control, there is a indirect index control. The so-called direct index control, refers to the controlled variable itself needs to control the process indicators; but in fact because of various restrictions can not be directly obtained, so only indirect control.
No matter which side, have a direct impact on the operation of the Drawing Machine, so the important relationship between them is beyond doubt. As a user of us, we should also be aware of this and strengthen our focus on this.
Practice tells us that the Drawing Machine drawing speed and drawing force can not be improved at the same time, in improving the speed of equipment, when the pull force will be reduced. Why is there such a state? Xiao Bian for everyone to analyze the reasons.
To say the root of the words, because the speed of the Drawing Machine at the same time, its lubrication conditions have been improved, thereby reducing the friction coefficient, so to overcome the external friction and additional shear deformation required force will also be reduced, which will make Drawing force has also been reduced. In fact, this way, or good, at least Drawing Machine safety system will improve a lot.
But the Drawing Machine drawing speed can not be too high, otherwise the device starts the moment the wire is easy to be pulled off, even if you want to use high-speed Drawing Machine, it should also pay attention to configure the appropriate speed control device and ensure that the operation Of the steady acceleration to ensure that the drawing operation can be carried out normally.